Repair and Protection Systems

  • Home
  • Product
  • Repair and Protection Systems

Repair and Protection Systems

EPO repair and protection systems complies with international standardsand engineered in every stage of production and applaction under quality control. The vast experience obtained from these processes are used toguide the R&D and production and the input gained from practices arecontributed to provide the suitable products and methodology for structuresfor long service lifes.

EPO recommends R&D approved products and improved systems,
EPO KNOW-HOW guarranties reliable solutions.

EPO BOND FD 3:1

Epoxy Based fairing Coat, Steel Anchoring Adhesive and Pore Sealing Putty
EPO BOND FD is thixotropic solvent free, two component based on epoxy resins, graded fillers and thixotropic agents, specially formulated to meet a range of service temperatures from 25°C to 60°C. The base component is white coloured and the hardener is black to facilitate ease of mixing.

Download

EPO CEMENT 012

Fiber Reinforced Cementitious Concrete Structural Repair Overhead Mortar
EPO CEMENT 012 is supplied as a ready to use fibre reinforced cementitious dry powder requiring only the addition of water to produce cohesive easily applied mortar. The product is a careful blend of Portland cements, graded silica sands, shrinkage compensating agents silica fume, water reducing agents and compatible water resistant polymers. The product is designed to give good adhesion and cohesion in, the plastic state and low water requirement resulting in a non-shrink low porosity mortar with high compressive strength and durability.

Download

EPO CEMENT 020

Polymer Modified Cementitious Repair and Finish Mortar
EPO CEMENT 020 is a cementitious polymer modified single component mortar, based on a blend of Portland cements, fine inert filler, special additives and water reducing agents. The product is designed to give good adhesion and cohesion in plastic states and low water requirement resulting in low porosity and long durability.

Download

EPO CEMENT 020 C

Polymer Modified Cementitious Repair and Finish Mortar
EPO CEMENT 020 C is a cementitious polymer modified single component mortar, based on a blend of Portland cements, graded silica sands, water reducing agents and compatible water resistant polymers. The product is designed to give good adhesion and cohesion in plastic states and low water requirement resulting in low porosity and long durability.

Download

EPO CEMENT 030

Cementitious Coarse Concrete Structural Repair Mortar
EPO CEMENT 030 is supplied as a ready to use dry powder requiring only the addition of water to produce cohesive easily applied mortar. The product is a careful blend of Portland cements, graded silica sands, shrinkage compensating agents silica fume, water reducing agents and compatible water resistant polymers. The product is designed to give good adhesion and cohesion in, the plastic state and low water requirement resulting in a non-shrink low porosity mortar with high compressive strength and durability.

Download

EPO CEMENT PLAST C

Polymer Modified Cementitious Coarse Base Coat and Finish Mortar
EPO CEMENT PLAST C is a cementitious polymer modified single component mortar, based on a blend of Portland cements, graded fine and coarse silica sands, water reducing agents and compatible water resistant polymers. The product is designed to give good adhesion and cohesion in plastic states and low water requirement resulting in low porosity and long durability.

Download

EPO CEMENT PLAST F

Polymer Modified Cementitious Fine Base Coat and Finish Mortar
EPO CEMENT PLAST F is a cementitious polymer modified single component mortar, based on a blend of Portland cements, graded fine silica sands, water reducing agents and compatible water resistant polymers. The product is designed to give good adhesion and cohesion in plastic states and low water requirement resulting in low porosity and long durability.

Download

EPO CEMENT

Polymer Modified Cement Based Ready Mortar for Adhering and Steel Protection
EPO CEMENT is a cementitious polymer modified single component adhesion mortar, based on a blend of Portland cements, graded silica sands, water reducing agents and compatible water resistant polymers. When mixed with water it forms slurry that can be applied by brush or spray to the clean exposed reinforcements or directly on the damped/prepared concrete surface when used as bonding coat.

Download

EPO DUR 1042 BZ

Epoxy Grout Repair and Filler Mortar
EPO DUR 1042 BZ is a 100% solid, three component free flow, non-shrink epoxy grout formulated to provide easy placement. It provides high strength and creep resistance combined with the highest effective bearing area.

Download

EPO GLUE MORTAR

Thin Bed Mortar for Light weight Blocks
EPO GLUE MORTAR is ready to use high quality cementitious glue mortar used for laying Light weight blocks, fly ash bricks, concrete blocks etc. It is easy to use comprises of cement, graded sand polymer and additives.

Download

EPO GROUT

Cement Based, Shrinkage Compensated Fluid Grout
EPO GROUT is a ready to use free flow, high strength and non-shrink product in powder form, which requires only the addition of water to produce grout. It is a careful blend of Portland cement, graded sand, water reducing agents and auxiliary expansive modifying agents to compensate for shrinkage in both the plastic and the hardened states.

Download

EPO POL

Acrylic Protective Coating
EPO POL is a pure Methacrylic resin based anticarbonation protective coating. It is available in a wide range of colours. The coating is reactive and capable of producing a chemically-bound hydrophobic barrier, thus inhibiting the passage of water and water-borne contaminants. The EPO POL system is a single component pigmented coating, which is ready for immediate site use.

Download

EPO BOND FD 1:1

Epoxy Based Fairing Coat, Adhesive and Repair Putty
EPO BOND FD 1:1 is thixotropic solvent free, two component based on epoxy resins, graded fillers and thixotropic agents, specially formulated to meet a range of service temperatures from 25°C to 60°C. The base component is white coloured and the hardener is black to facilitate ease of mixing.

Download

EPO BOND FD 2:1

Epoxy Based fairing Coat, Steel Anchoring Adhesive and Pore Sealing Putty
EPO BOND FD is thixotropic solvent free, two component based on epoxy resins, graded fillers and thixotropic agents, specially formulated to meet a range of service temperatures from 25°C to 60°C. The base component is white coloured and the hardener is black to facilitate ease of mixing.

Download

Recent Posts