Structural Strengthening Systems
EPO recommends R&D approved products, improved systems,
EPO KNOW-HOW guarranties reliable solutions.

EPO CARBOPLAK
Carbon Fiber Plate
100% single direction carbon fiber reinforced plate, condensed with epoxy resin. EPO CARBOPLAK, our carbon fiber reinforced product, is a structural reinforcement system which should be used with EPO BOND SC epoxy based adhesive mortar.

EPO CARBOSHEET
CFRP Strengthening Systems
The mixed EPO BOND CF is applied on the surface using a trowel or brush as 0.7 – 1.2 Kg/m2 depending on the roughness of the surface.

EPO BOND CF
Epoxy Special Development Steel, Metal & Carbon Fiber Adhesive
This is a reinforcement system used for wrapping, strength increasing and flexure control. System components: Carbon fiber woven EPO CARBOSHEET and epoxy based saturation resin EPO BOND CF.

EPO BOND SC
Steel, Metal and Carbon Fiber Epoxy Adhesive
Epoxy materials used in repairing, reinforcing reinforced concrete structures

EPO DUR 1042 BZ
Epoxy Grout Repair and Filler Mortar
EPO DUR 1042 BZ is a 100% solid, three component free flow, non-shrink epoxy grout formulated to provide easy placement. It provides high strength and creep resistance combined with the highest effective bearing area.

EPO BOND FD
Epoxy Based fairing Coat, Steel Anchoring Adhesive and Pore Sealing Putty
EPO BOND FD is thixotropic solvent free, two component based on epoxy resins, graded fillers and thixotropic agents, specially formulated to meet a range of service temperatures from 25°C to 60°C. The base component is white coloured and the hardener is black to facilitate ease of mixing.

EPO BOND FD 1:1
Epoxy Based Fairing Coat, Adhesive and Repair Putty
EPO BOND FD 1:1 is thixotropic solvent free, two component based on epoxy resins, graded fillers and thixotropic agents, specially formulated to meet a range of service temperatures from 25°C to 60°C. The base component is white coloured and the hardener is black to facilitate ease of mixing.

EPO MICROCRETE
Shrinkage Compensated, Cement based fluid Micro concrete
EPO MICROCRETE is a ready to use free flow, high strength and non-shrink product in powder form, which requires only the addition of water to produce micro concrete.
It is a careful blend of Portland cement, graded aggregate, sand, water reducing agents and auxiliary expansive modifying agents to compensate for shrinkage in both the plastic and the hardened states.

EPO FIBER
Fiber for Concrete, Mortar & Gypsum
EPO FIBER is a multifilament fiber for improving the characteristics of construction elements made of concrete, Mortar and gypsum. The fiber will ensure uniform and fast three-dimensional distribution throughout the Matrix. EPO FIBER efficiently reduces shrinkage cracking in the early setting phase. EPO FIBER prevents sedimentation-the subsequent settlement of the matrix and creates high level of concrete structures exposed to aggressive waters.





