Insulation and Protection Systems

  • Home
  • Product
  • Insulation and Protection Systems

Insulation and Protection Systems

Epo waterproofing and protection systems use international standards and controlled in every stage of production and application with respect to engineering. The vast experience obtained from these processes are used to direct the R&D and production. The input obtained from practices are converted to provide the suitable products and methodology for structures with long service life.

EPO recommends R&D approved products, improved systems,
EPO KNOW-HOW guarranties reliable solutions.

EPO BITU COAT

Rubberized Bitumen Emulsion Based Protective Coating
EPO BITU COAT is a ready to use cold applied bitumen emulsion modified with rubber latex for damp proofing and waterproofing coating specially formulated and resistant to sub-soil corrosive salt, fungal protection and waterproofing of substrate including metals.

Download

EPO BOND PVA

Multipurpose PVA Adhesive Sealer and Cement Mortar Improver
EPO BOND PVA is multipurpose adhesive based on polymerized (poly vinyl acetate) resin emulsion, which formulated specially for use as a bonding aid with gauging water for cementitious plaster and mortars not exposed to dampness of water. It is a white liquid of medium viscosity which dries to a transparent film.

Download

EPO CURE

Acrylic Polymer, Water Based Concrete Curing Compound
EPO CURE is a water based Acrylic polymer emulsion liquid membrane curing compound, milky white in colour and cures to a clear film, provides a film high water retention enabling curing of the concrete by reducing loss of water from the concrete

Download

EPODUR 1042 EPOXY JOINT FILLER

Epoxy Resin Based Tile Grout
EPODUR 1042 EPOXY JOINT FILLER is a three component solvent free epoxy resin based grout consisting of a base, hardener and specially selected fine fillers. The components are mixed together to give a smooth, non-sag paste grout.

Download

EPO EPOXY TILE ADHESIVE

Epoxy Resin Based Tile Adhesiv
EPO EPOXY TILE ADHESIVE is a solvent free three component epoxy resin based adhesive consisting of pre-weighed quantities of base, hardener and specially selected filler. The components are mixed together to give a smooth non-sag paste adhesive.

Download

EPO FIX C

Cementitious Ceramic and Tile Fixing Adhesive
EPO FIX C is a ready to use single component product, only addition of water needed to produce a cohesive, sticky, highly adhesive thin bed tile and ceramic fixing mortar. EPO FIX C powder is a blend of grey or white cement, selected fine sand, water retention agents and specially selected chemicals to enhance workability and application ease.

Download

EPO FIX EP

Polymer Modified Cement Based Tile and Ceramic Fixing Mortar
EPO FIX EP is supplied as a ready to use two component Acrylic latex polymer modified product to produce a cohesive, sticky highly adhesive thin bed tile fixing mortar. EPO FIX EP powder is a blend of grey or white cement, selected fine sand, water retention agents and specially selected chemicals to enhance workability and application ease.

Download

EPO FIX PLUS

High Performance Cement Based Tile and Ceramic Fixing Mortar
EPO FIX PLUS is supplied as a ready to use single component product, only addition of water needed to produce a cohesive, sticky, highly adhesive thin bed tile and ceramic fixing mortar. EPO FIX PLUS powder is a blend of Portland cement, selected fine sand, polymer, water retention agents and specially selected chemicals to enhance workability and application ease.

Download

EPO FIX

Cement Based Tile and Ceramic Fixing Mortar
EPO FIX is supplied as a ready to use single component product, only addition of water needed to produce a cohesive, sticky, highly adhesive thin bed tile and ceramic fixing mortar. EPO FIX powder is a blend of grey or white cement, selected fine sand, water retention agents, polymer and specially selected chemicals to enhance workability and application ease.

Download

EPO FOAM

Foaming Agent for Light Weight Concrete
EPO FOAM is a pale brown liquid foaming agent which is used to produce light weight foam concrete for a variety of insulation and construction applications.

Download

EPO FUGAFLEX

Cementitious Polymer Modified Tile and Ceramic Joint Filler
EPO FUGAFLEX is a blend of specially selected cements, fillers and synthetic organic polymers. When added to water it readily blends to produce a smooth creamy paste which when set is water and mould resistant. EPO FUGAFLEX is used in conjunction with EPO FIX tile mortar.

Download

EPO KARSOR

Integral Water Proofing Admixture for Concrete
EPO KARSOR is a chloride free water proofing concrete admixture in liquid form that acts both as a highly efficient plasticizer and waterproofing agent, which functions by forming an internal barrier against water penetration in concrete to provide maximum reduction in permeability without any unwanted side effects. It is suitable for use in tropical and hot climatic conditions.

Download

EPO LATEX AC

Acrylic Emulsion Additive for Cementitious Mortars & Toppings
EPO LATEX AC is a high concentration acrylic polymer emulsion blended with selected auxiliary modifying agents to improve the general properties of the cementitious mixes and as bonding. It is nonyellowing and has excellent resistance to UV degradation, heat and common chemicals. It improves the tensile, flexural, compressive, and water proofing properties.

Download

EPO LATEX SBR NO.1

SBR Based Multipurpose Waterproof Bonding Agent and Mortar Additive
EPO LATEX SBR NO.1 is a highly concentrated modified styrene butadiene rubber emulsion which is supplied as a ready to use white liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries. Being resistant to hydrolysis, it is ideal for internal and external applications in conjunction with cement.

Download

EPO LATEX SBR

SBR Based Multipurpose Waterproof Bonding Agent and Mortar Additive
EPO LATEX SBR is a modified styrene butadiene rubber emulsion which is supplied as a ready to use white liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries. Being resistant to hydrolysis, it is ideal for internal and external applications in conjunction with cement.

Download

EPO PLUG

Fast Setting, Cement Based Plug Mortar
EPO PLUG is a ready to use cement based, rapid setting plug mortar for plugging and stopping water leaking through the concrete.

Download

EPO POL S

High Performance Methacrylic Resin Based Steel Protective Coatings
EPO POL S is a single component, zinc phosphate modified Methacrylic resin based steel protective coating. The coating is high Mechanical and wear strength provides a permanent protection of steel components against corrosion. EPO POL S is water repellent, high UV resistance, high resistance against Cl- (Chlorine) and CO2 gases, easy to apply, dries quickly, highly resistant to chemicals and excellent adhesion on steel and concrete.

Download

EPO POL

Acrylic Protective Coating
EPO POL is a pure Methacrylic resin based anticarbonation protective coating. It is available in a wide range of colours. The coating is reactive and capable of producing a chemically-bound hydrophobic barrier, thus inhibiting the passage of water and water-borne contaminants. The EPO POL system is a single component pigmented coating, which is ready for immediate site use.

Download

EPO ROOF

Acrylic Roof Protective Coating
EPO ROOF is a single component flexible premium quality Acrylic polymer based elastomeric coating especially designed for roof protection. Applied as a liquid it cures to form a durable protective waterproof membrane

Download

EPO SEAL R

Acrylic Polymer Modified Elastomeric Cementitious Waterproofing Coating
EPO SEAL is a two component product consisting of “Part A” a blend of liquid acrylic latex copolymers and “Part B” cementitious waterproofing powder. Both products part “A:’ and Part “B” are mixed at the job site and applied with a brush or trowel.

Download

EPO SEAL

Acrylic Polymer Modified Elastomeric Cementitious Waterproofing Coating
EPO SEAL is a two component product consisting of “Part A” a blend of liquid acrylic latex copolymers and “Part B” cementitious waterproofing powder. Both products part “A:’ and Part “B” are mixed at the job site and applied with a brush or trowel.

Download

EPO CEMENT COAT

Cementitious Acrylic Polymer Modified UV resistant, Waterproof Protective Coating
EPO CEMENT COAT is a two component cementitious UV resistant water proof protective coating. This product consisting of “Part A” a blend of liquid acrylic latex copolymers and “Part B” cementitious waterproofing powder. Both products part “A:’ and Part “B” are mixed at the job site and applied with a brush or trowel.

Download

EPO GUARD

Silane Terminated Coating
EPO GUARD is a silane-terminated ready to use coating based on α-silane technology for the impregnation of mineral substrates or as a thin layer clear coating for concrete and wood.

Download

EPO PU FOAM SPRAY 40

Spray Polyurethane Foam System
EPO PU FOAM SPRAY 40 is a two component polyurethane system developed for the manufacture of rigid polyurethane foam. It has been designed for spray on
roof applications that serves as an excellent insulation material.

Download

Recent Posts